PRONAL中國子公司產品篇介紹·2019.2.9第一篇

19-02-09 09:46 點擊量：264

PRONAL中國子公司產品篇介紹·2019.2.9第一篇

PRONAL China Subsidiary Products Chapter 1, 2019.2.9

PRONAL公司生產的新型船用充氣橡膠氣囊，采用最新整體技術（每層之間相互一體技術）。囊頭比囊體多兩層新工藝，從而整體提升了氣囊的使用壓力。

PRONAL's new marine inflatable rubber airbag uses the latest integrated technology (integration technology between each layer). The head of the balloon is two layers more than the body of the balloon, which improves the pressure of the balloon as a whole.

加強了船用氣囊的氣密性，強度以及安全性。經專用橡膠配方所生產出的氣囊使用周期是市場普通氣囊的2倍。

It strengthens the airtightness, strength and safety of marine airbags. The service life of the airbag produced by the special rubber formula is twice as long as that of the common airbag in the market.

每一只氣囊出廠前，必須經過嚴格外表檢驗和充氣檢驗，測試其工作壓力，單位時間內的氣體泄漏率不達標，不合格決不出廠。

Before each airbag leaves the factory, it must pass strict appearance inspection and inflatable inspection to test its working pressure. The gas leakage rate per unit time is not up to the standard, and the unqualified airbag will never leave the factory.

產品節能環保、結構合理、經久耐用，囊體表面光滑圓順，囊頭安全可靠，已經在國內外得到廣泛的應用，形成了本地區地方特色產品。

The products are energy-saving, environment-friendly, reasonable in structure, durable, smooth in surface, safe and reliable in head. They have been widely used at home and abroad, forming local characteristic products in this region.

并且通過該項目，建立了適合船用上下水的數學模型，研究出其機理及其理論；開發出適合船舶專用氣囊的硫化工藝。橡膠氣囊，又叫混凝土預制空心板橡膠充氣芯模，橋梁充氣芯膜，橡膠內模。是利用橡膠的高分子特性與高強度纖維布硫化而成的一種可膨脹、收縮的不同形狀的內模。

Through this project, a mathematical model suitable for ship launching and launching is established, its mechanism and theory are studied, and vulcanization technology suitable for ship special airbag is developed. Rubber air bag, also known as concrete prefabricated hollow slab rubber inflatable core mold, bridge inflatable core membrane, rubber internal mold. It is a kind of expandable and shrinkable internal mould made of rubber's high molecular properties and high strength fibre cloth vulcanized.

主要用于公路橋梁混凝土前張法后張法梁的澆筑成型工程。同時也被涵洞排污工程所采用。

It is mainly used for the pouring and forming of the front-tensioned and rear-tensioned concrete beams of highway bridges. At the same time, it is also adopted by culvert sewage engineering.

橡膠氣囊充入壓縮空氣后，氣囊即伸展膨脹達到其截面設計要求，充氣壓力根據廠家標識而定。其并可以從空腔中抽出膠囊。它使用簡便，經濟耐用，不充氣時柔軟收縮，任意折疊、卷曲，充氣膨脹后具有足夠的強度來承受混凝土的壓力。能代替原有的木模、竹模、鋼模，可以多次重復使用，是一種降低成本和加快施工進度的砼制品配套產品。

After the rubber balloon is filled with compressed air, the balloon expands and expands to meet the cross-section design requirements. The inflatable pressure depends on the manufacturer's label. The capsule can also be extracted from the cavity. It is easy to use, economical and durable, flexible and shrinkable when not inflated, arbitrarily folded and curled, and has enough strength to withstand the pressure of concrete after inflated expansion. It can replace the original wood mould, bamboo mould and steel mould, and can be reused many times. It is a supporting product of concrete products to reduce costs and speed up construction progress.

本文版權歸 舉升氣墊 http://www.ywkchg.cn/ 所有，如需轉載，請帶上鏈接，謝謝！

Copyright of this article belongs to hoisting air cushion http://www.ywkchg.cn/All, if you need to reprint, please take a link, thank you!